 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
| Polyester Coatings
|
|
|
White
Polyester Basecoat, high build, easy sanding. Cure with Accelerator and
curing agent Catalizzatore. It is particularly
appreciated for its good distension and high yeild.
(We suggest a double spray pump system). Dilute with Astra Sol PE Reducer 15%-30%
|
| TIXOFOND
140/G (Polyester Clear Basecoat) |
Clear Tixotropic Polyester Basecoat,
very high build, easy sanding. Cure with Accelerator and curing agent Catalizzatore. Employ: spray, even with electrostatic equipment or (we suggest a double pump system). Dilution: 15-30% with Astra Sol PE Reducer 15%-30% On MDF boards, ALWAYS a prior layer of PU INSULATOR is recommended |
LUXPOL CLEAR,
WHITE AND BLACK |
Clear
and Pigmented Tixotropic Polyester High Gloss Top
Coat, with its ACCELERATOR and curing agent (CATALIZZATORE LENTO). It is a
really exceptional finishing, that provides a brilliant surface (that is not polishable, with the exception of LUXPOL 610 and 620
TIX).
LUXPOL films show these properties: -high built and filling of the surface -maximum distension of the surface -exceptional hardness and glossiness -time durability of the glossiness (higher that high gloss PU coatings) |
| Polyurethane Basecoats & Sealers
|
|
POLIFOND 30-E BIANCO (White Polyurethane Basecoat) 
|
White Polyurethane Base Coat, for horizontal and vertical purpose. Use: by spraying, even with electrostatic guns to be cured with 50% volume of B-97 or 40% with B-640. It’s a standard base coat, high build and easy to sand. |
| POLIFOND
30-E (Clear Polyurethane Sealer) |
Polyurethane
High Build normally it’s used in one single layer but can be coated more than
once depending on what film build the customer wants to achieve. It performs
excellent in every condition. Polyurethane base coats with their curing
agents (hardeners) (to add at 50% by volume). They can be sprayed (also with
electrostatic equipments), diluting with 15-20% of Astra Sol PU Medium Thinner. They are not intended for outdoor purpose.
|
| POLIFOND 63
Clear (Non Yellowing Polyurethane Clear Sealer) |
Polyurethane High Build Clear Non Yellowing Sealer for use on
light coloured timbers and veneers when used with
the B-650 Hardener (Reduce with Astra Sol PU Medium
Thinner) |
| ISOPUR AS +
ISOPUR B
|
Two Pack Clear Polyurethane Isolator sealer,
fast drying, with its curing agent fit for clear and dark woods, also exotic
kind. Use: spray or brush in low thickness (80/90 gr./m²).
To be cured at 100% by volume, it requires only a little reducing with Astra Sol Med Thinners to be ready for the use. It’s very
appreciated in the casket industry. After the application, sand the layer
(even after 6 hours) prior to proceed with the polyester base coat |
TIECOAT
1605
|
Two
Packs Clear non primer, for non wooden surfaces such as PVS, ABS, melamine,
special papers (but no polyethylene or polypropylene). It has to be used at
50% vol. with its curing agent B-900 N.I., and to be reduced with
Acetone (1:1).
|
| Polyurethane Clears & Pigmented Topcoats
|
|
| FINIPUR
609 (Polyurethane Pigmented Topcoat) 
|
High Quality White Polyurethane Topcoat available in various gloss levels. Its formulation allows excellent wetting and flow, distension and smoothness of the film of the paint. Superb high covering (especially on the edges of the boards). Can be used over PU, PE Basecoats when previously sanded. It’s a Topcoat for indoors. It may also be used on certain outdoor application, with special hardeners and UV filters. Regarding the White and all other colours that can be made from the white, we recommend Astra Sol PU Slow (better Flow) and use its B-609 N.I hardener (non yellowing) It’s excellent on both PU and PE basecoat |
| FINIPUR 609
(clear) (Polyurethane Clear Topcoats) 
|
Polyurethane
Clear Topcoats. Use: Spray (also electrostatic). Available in various gloss
levels. Compared to other clears The Finipur 609
shows these differences:
1. Best covering 2. Higher smoothness 3. Better film distension 4. Better wetting Finipur 609 can be cured with B-43 or b-609 R.I hardeners |
FINILUX 737 (spazzolabile) (Polyurethane Clear Gloss Topcoat) (Buffable) 
|
Polyurethane
Clear Gloss Topcoat. Hardener B-737 R.I 100% Volume. Use: Spray (also can use
electrostatic gun). It has excellent vertical hold properties and optimal distension.It leaves a high build layer and very smooth
to the touch.Thin with Astra Sol PU Slow thinner. When ambient temperature is 22-24 degrees, use Astra Sol High Strength Retarder.
|
FINILUX 737 BIANCO (Polyurethane White Pigmented Gloss Topcoat) (Buffable) 
|
Polyurethane Pigmented Gloss Topcoat, direct derivative from the
clear version (Hardener B-737 N.I recommended for the whites) Use: Spray Excellent
for buffing if needed Thinning by adding 30% of Astra Sol PU Slow. When ambient temperature is 22-24 degrees, use Astra Sol High Strength Retarder. |
| Acid Cured Coatings
|
|
| DURACAT (Clear Acid Cure Topcoat) |
Two Pack Acid Catalysed Clear Coating. Exhibits high film build and excellent flow, superior chemical and abrasion resistance compared to single pack lacquers. Suitable for use over: Pre Cat Sealer (Astra cat High Build Sealer Clear) or Polyurethane Clear sealer. (Polifond 30E Clear) Use: Spray only Mix: 20 part A to 1 part Catalyst Thinning:20-30% Astrasol PU Slow |
|
|
|
| Single Pack Coatings
|
|
| NITROFOND
2100 (trasparente)
|
Clear
NC base coat, spray and dip coating use. Dilution: 10-20% with Additivo D/110 (“Antifog” nitro
thinner). Also available in white version.
|
| NITROFIN 2100
(trasparente )
Matt, Satin, Semi Gloss, Gloss |
Clear
NC Clear Topcoat & Base Coat, spray and dip coating uses. Dilution:
10-20% with Additivo D/110. These products are fast
drying and leave a uniform layer, smooth to the touch and with a good body.
For the available sheens see the proper column.
|
| PRECAT
SEALER (Astra Cat High Build Clear Sealer) |
NC
Clear Base coat, precat type. Use: spray, Dilution: 20-25% with Astra Sol Lacquer Thinner This product is very easy to use. Fast drying, easy to sand and fit for the over layering with same family products (PRECAT and ACID CATALYSED). |
| PRECAT TOP
COAT (Astra Cat High Build Clear Top Coat) |
NC-
Clear Top Coats, precat type.
|
| Acrylic Coatings
|
|
| ACRIFOND
900 (Acrylic Clear Sealer) |
Clear Acrylic 2K Sanding Sealer, NON for clear wood such as ash tree, maple, pear, etc., to use with its non curing agent B-900 N.I. (10% vol.). Use: spray and curtain coating. Reduce the minute with 20%-30% of Astra Sol Med Thinner. It’s a high build base coat, elastic, fast drying, with good stackability and easy to sand. In the formula there also are UV filters. Pot life of the mixture is more than 24 hours. |
| ACRIFIN 902 (Acrylic Clear Top Coat) |
Clear
Acrylic 2K Top Coat, NON YELLOWING for clear wood such as ash tree, maple,
pear, etc., to use with its non yellowing curing agent B-900 N.I. (10% vol.). Use: spray and curtain coating, also automatic machines.. Reduce the minute with 20%-30% of Astra Sol Med Thinner. It’s a high built top coat, elastic, fast drying, anti-scratch, with good stack ability and non yellowing (in the formula there also are UV filters). ACRIFIN 902/00: 3-5 gloss ACRIFIN 902/05: 5-10 gloss ACRIFIN 902/10: 10-15 gloss ACRIFIN 902/20: 20-25 gloss ACRIFIN 902/30: 30-35 gloss ACRIFIN 902/40: 40-55 gloss ACRIFIN 902/90: 85-90 gloss * high gloss has to be cures at 20% ! |
|
|
|
|
|
|
| Unicolour Stains
|
|
|
|
|
|
|
|
|
|
|
|
